JANPOS JANPOS

JANPOS

PRODUCTS
Janpos Smart Eyes Create A Better World
Homepage
/
Products
/
Measuring Sensor
/
Split laser distance sensor

PRODUCTS

Focusing on the research, development, production and application of various intelligent manufacturing related products. 

Homepage
/
Products
/
Measuring Sensor

CATEGORY

All product categories
Split laser distance sensor

Split laser distance sensor

Retail price
0.0
Yuan
Market price
0.0
Yuan
Number of views:
1000
Product serial number
LS-D1 series
Category
Measuring Sensor
Quantity
-
+
Stock:
0
1
• Smaller size, easy to operate
• Can be connected to the bus
• Can be used in complex environments with controllers
Products Detail
Parameters
Parameter
Size

 

1. Smaller size

The LS-D1 series is smaller than the LS-D2 series.
     

2. Use with controller in complex environment

For complex and small environments, the LS-D1 series can be remotely controlled via a controller.

 
     

3. Equipped with super-resolution algorithm

The ideal waveform is automatically processed according to the surface condition of the target workpiece. Even workpieces that were previously difficult to detect, such as thin metal wires and resins, can be stably detected without adjustment.
     

4. Configure the concave distance counting filter function

This function automatically recognizes the edge of the concave distance and outputs each concave distance at once. In the application fields of counting and seam detection, it can be easily set without wasting time.
Step 1   Step 2   Step 3
   
Press the SET button on the side with the lower concave distance   Press the SET button on the side with the higher concave distance   Automatically enter thresholds at intermediate values
         
Counting the number of prints

 

Application Scenario

   
Measuring the residual amount of functional films   Workpiece flatness detection   Check tire deflection
         
   
Detecting the warpage of substrates   Confirm the arrangement of the packaging boxes   Testing the seams of rubber sheets
         

 

 

We could not find any corresponding parameters, please add them to the properties table

 

Sensor
Model LS-D1-100
Probe structure Division type
Output NPN
Measurable range 30~80mm
Optimal measuring range 30~50mm
Spot size 0.8*0.5mm
Response time 2ms/10 ms/50 ms switching mode
Repeatability 20μm
Light source Red semiconductor laser Class 2 [JIS/ IEC/GB/ (FDA (Note 2)] Maximum output: 1.8mW, emission peak wavelength: 650nm
Voltage 10-30VDC, including ripple 10% (pp), Class2 or LPS
Power consumption 24V/40mA
Control output NPN open collector applied voltage is 30 VDC or less, control current is 100 mA or less, residual voltage is 1.2 V or less when 10 mA or less, and 2 V or less when 10 to 100 mA
Protect the circuit Power reverse connection protection, output overcurrent protection, output surge protection, output reverse connection protection
Output Action Switching method: ON when light enters/ON when light is blocked
Enclosure rating IP67
Ambient Lighting Incandescent lamp: 2000 lux or less Sunlight: 4000 lux or less
Ambient temperature -10 to +50°C (no freezing)
Storage temperature -25 to +75°C (no freezing)
Relative humidity 35 to 85%RH (non-condensing)
Impact resistance 1000 m/s² X, Y, Z directions 6 times each
Vibration resistance 10 to 55 Hz, double amplitude 1.5 mm, 2 hours each in X, Y, Z directions
Timer OFF/ON-delay/OFF-delay/single pulse

 

Controller
Model   LS-DC1
Installation method   DIN rail mounting setup
Communication method   RS-485 (cable up to 10m)
Show Measurement value and setting Dot matrix display 128 x 64 pixels Chinese/English optional
Indicator Lights

Power indicator: red

Communication indicator: green

Output indicator light: orange
I/O Switching output 1 channel output NPN
Max.100mA / DC24V Residual voltage 1.8V or less
Rating Voltage DC12~ 24V
Current consumption 24V/20mA
Environmental resistance Protect the circuit Reverse connection protection, over current protection function
Protection level IEC specification IP50
Operating environment temperature/humidity -20～+50℃/35～85%RH(no condensation or icing)
Storage environment temperature/humidity -20～+60℃/35～85%RH(no condensation or icing)
Vibration resistance 10~55Hz, double amplitude 1.5mm, 2 hours in each direction of X, Y and Z
Impact resistance 500m / S² (about 50G), 3 times in each direction of X, Y, and Z
Material   PC
Weight   170g

 

Model：LS-D1-100

 

 

Model：LS-DC1

 

 

 

Previous
Precision air pressure sensor
Next
Integrated laser ranging sensor

Hot Products

 

  • EtherCAT Communication Unit

    EtherCAT Communication Unit
    • Suitable for all kinds of products
    • Simple operation
    • Beautiful appearance design
  • Fiber Amplifier

    Fiber Amplifier
    • One-touch preset
    • Automatic maintenance
    • Simple and convenient
  • Precision air pressure sensor

    Precision air pressure sensor
    • High-precision detection
    • Simple operation
    • Protection level IP67
  • 3D fully automatic image measuring instrument

    3D fully automatic image measuring instrument
    • Original 2D & 3D composite calculation
    • High-precision detection
    • Ultra-high 3D processing efficiency
  • Laser displacement sensor

    Laser displacement sensor
    • Applicable to various materials
    • Triangle detection method
    • High precision measurement
  • Color Laser Coaxial Displacement Meter

    Color Laser Coaxial Displacement Meter
    • Applicable to various materials
    • Easy to adjust the optical axis
    • Applicable to precision products

    • GET IN TOUCH

    Have questions,need specifics? Let's get this conversation started.

    HELP AND SUPPORT

    How can we help?

    Products Search
    Submit
    Close

    Tel

    0086-574-82822433

    WeChat

    WeChat

    TOP

    TECHNOLOGY

    JANPOS

    Add：36，Mo Gan Shan Road,Beilun District,Ningbo,Zhejiang,China.

    Tel: 0086-574-82822433 / (400)8679286

    Fax: 0086-574-88137049

    Email: office@ejanpos.com

     

    Service Hotline

    Copyright © 2021 JANPOS  All right reserved.  浙ICP备17046689号-1  Powered by www.300.cn