Product Introduction
Category:
Optical fiber amplifier
• Visual interface (clear & intuitive)
• Bilingual system
• Long service life
- Product Details
- Specification Parameters
- External dimensions
-
I. Convenient interface setting function
LED display screen with a more flexible interface setting.
II. Sensitivity Enhancement
Use less power, enhance sensitivity, and significantly extend the lifespan of optical fibers.
III. Multilingual Display Function
Multiple language switching for convenient operation by engineers.
4. Bar Display Function
Displayed in bar form, the peak, threshold, and trough are immediately obvious.
It is able to confirm the excessive gain detected.
V. Factory Default Settings
JF-20 JF-20S Sequence Project Initial settings Sequence Project Initial settings A Detection mode Standard A Detection mode Standard B Power Mode Standard B Power Mode Standard C Timer type Disable C Timer type Disable D Screen flip Close D Luminous intensity 90 And E Frequency setting -1 And E Output polarity Constant-on output NPN (L-ON) O Output polarity Constant-on output NPN (L-ON) F Hysteresis Level Standard L Language Selection Chinese G Key lock Close H Screen-off mode 180 seconds later I Screen brightness Level-2 J Display filtering Turn on K Screen flip Turn on L Main interface settings Numerical interface M Self-adjusting brightness -- N Automatic Gain Close O Frequency setting Frequency - 1 P LOGO Settings Turn on Q Language Selection English R Initialization settings -- Product Selection 
Key words:- 光纤放大器
-
Model JF-20 JF-20P JF-20S JF-20SP Output NPN PNP NPN PNP Light source Four-element red LED (peak wavelength 630 nm) Control output 24V 100mA Output switching Light-On/Dark-On Switch Protection circuit Power reverse connection protection, output current protection, output surge protection, output reverse connection protection Power supply voltage 12–24V DC Power consumption Standard mode: Up to 505 mW (24 V / up to 21 mA) Response time 500μs (STD) / 300μs (H-SPD) / 50μs (SH-SPD) / 3ms (MEGA) / 1ms (SUPER) Operating environment brightness Incandescent lamp: up to 20,000 lux; daylight: up to 30,000 lux. Operating ambient temperature -20 to +55℃ (no freezing) Operating environment humidity 35% to 85% RH (no condensation) Seismic resistance 2-hour vibration in each of the X, Y, and Z directions, with a double amplitude of 1.5 mm from 10 to 55 Hz. Impact-resistant 500 m/s, 2 hours in each of the X, Y, and Z directions Materials Polycarbonate Housing dimensions 83 mm (D) × 10.5 mm (W) × 27.2 mm (H) -
Model: JF-20 Series
Keywords:
Sensor
Measurement sensor
Measuring instrument
Visual system
Communication
Recommended Products
If you have any questions or would like to learn more details, please contact us!
Address: No. 36, Moganshan Road, Beilun District, Ningbo City, Zhejiang Province
Phone:+86-574-82822433 / (400)8679286
Fax:+86-574-88137049
Email:office@ejanpos.com