Product Introduction
Category:
Split-type laser ranging sensor
• Smaller in size, easy to operate
• Bus-compatible
• The matching controller is designed for complex environments.
- Product Details
- Specification Parameters
- External dimensions
-
1. Smaller volume
The LS-D1 series is smaller in size compared to the LS-D2 series.
II. The controller combination for complex environments
For complex and confined environments, the LS-D1 series can be remotely controlled via a controller.
3. Equipped with super-resolution algorithms
Based on the surface condition of the target workpiece, the system automatically performs ideal waveform processing. Even for previously difficult-to-detect workpieces such as thin metal wires and resins, stable detection can be achieved without any adjustments.
4. Configure the concave distance counting filter function.
This feature automatically identifies the edges of recesses and outputs the measurement for each recess in a single operation. In applications such as counting and seam detection, simple setup can be completed without time-consuming effort.
Step one Step 2 Step 3 
Press the SET button on the side with the lower recess. Press the SET button on the side with the higher concave distance. Automatically enter the threshold at the median value. 
Calculate the number of printed materials. Application scenarios 
Measure the margin of functional films. Workpiece Flatness Inspection Check tire deviation. 
Detect the warpage of the substrate. Confirm the arrangement of the packaging boxes. Inspect the joints of the rubber sheet. -
Sensor Model LS-D1-50A Probe structure Split type Output NPN High-precision measurement range Measurement range 25–50 mm Repeatability ±20 μm Other measurement ranges Measurement range 50–80 mm Repeatability ±50 μm Spot size 0.18 mm × 0.15 mm (at 50 mm) Response time 1ms/10ms/50ms switching mode Light source Red Semiconductor Laser, Class 2 [JIS/IEC/GB/(FDA Note 2)] Maximum Output: 1.8 mW; Peak Emission Wavelength: 650 nm Power supply voltage 10–30 VDC, including 10% (p-p) ripple, Class 2 or LPS Power consumption 24V/40mA Control output NPN collector open-circuit: When the external voltage is below 30 VDC, the control current is below 100 mA, the residual current is below 10 mA, and the residual voltage is below 1.2 V; when the current is between 10 and 100 mA, the residual voltage is below 2 V. Protection circuit Power reverse connection protection, output overcurrent protection, output surge protection, output reverse connection protection Output action Switching method: ON when light is detected / ON when light is blocked Enclosure protection rating IP65 Ambient lighting Incandescent lamps: below 2000 lux; daylight: below 4000 lux. Ambient temperature -10 to +50°C (no freezing) Storage environment temperature -25 to +75°C (no freezing) Relative humidity 35% to 85% RH (no condensation) Impact resistance 6 times each in the X, Y, and Z directions at 1000 m/s² Vibration resistance 10 to 55 Hz, double amplitude 1.5 mm, 2 hours each in the X, Y, and Z directions Timer OFF/ON - Delay/OFF - Delay/Single Pulse Controller Model LS-DC1 Installation method DIN Rail Mounting Setup Communication method RS-485 Display Measured value · Set value Dot matrix display, 128 x 64 pixels, Chinese/English optional Indicator light Power indicator light: Red
Communication indicator light: Green
Output indicator: Orange
I/O Digital output 2-channel output NPN Max. 100mA / DC 24V Residual voltage below 1.8V Rated value Power supply voltage DC 12~24V Current consumption 24V/20mA Environmental resistance Protection circuit Reverse polarity protection and overcurrent protection functions Protection level IEC rating IP50 Operating temperature/humidity -20～+50℃ / 35～85% RH (no condensation or icing) Storage environment temperature/humidity -20～+60℃ / 35～85% RH (no condensation or ice formation) Anti-vibration 10–55 Hz, double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions Impact-resistant 500 m/s² (approximately 50 G), 3 times in each of the X, Y, and Z directions Material PC Quality 170g -
Model: LS-D1-50A
Model: LS-DC1
Keywords:
Sensor
Measurement sensor
Measuring instrument
Visual system
Communication
Recommended Products
If you have any questions or would like to learn more details, please contact us!
Address: No. 36, Moganshan Road, Beilun District, Ningbo City, Zhejiang Province
Phone:+86-574-82822433 / (400)8679286
Fax:+86-574-88137049
Email:office@ejanpos.com