Product Introduction
Category:
Contact displacement sensor
• Up to 0.1 μm resolution
• Zero-point calibration
• Sensor head protection rating
- Product Details
- Specification Parameters
- External dimensions
-
One to eight
One master device can control up to eight slave devices.
II. Dedicated Bracket
The manufacturer provides a locking sleeve specifically designed for the JC series, so you don’t need to prepare a mounting bracket. Simply drill a 10mm-diameter hole, and you can easily install the sensor.
3. Easy to Use
The amplifier is designed to be simple and easy to operate, equipped with “▲/▼” buttons for menu selection. ◀︎ / ► The “button is used to specify a value.
IV. Automatic Calculation
Unlike conventional calculation methods—which rely on data recorded by the PLC—thickness and flatness calculations are performed automatically by the sensor head. Simply select the correct application mode—it’s that easy.
Application scenarios 
Detect shaft tilt Workpiece Flatness Inspection Check the packaging insertion and confirm whether the target is securely positioned in the correct location. 
Hard Drive Frame Assembly Inspection Vibration Monitoring of Convex-Concave Shafts Flatness Detection of Smart Camera Housings 
Assembly and Inspection of the Substrate Base positioning for machining equipment (suitable for use even in harsh environments) Press-fit management for equipment assembly 
Confirm the height of the assembled workpiece. Occlusal Examination Overlapping Check of Notes Serial number Photo Model Product Name Instructions Note 1 
OP-1009 Contact-type sensing head Standard type Compatible with JC/JC2 series 2 
OP-1001 Contact-type sensing head Flat type Compatible with JC/JC2 series 3 
OP-1002 Contact-type sensing head Roller type Compatible with JC/JC2 series 4 
OP-100301 Contact-type sensing head Needle-shaped Compatible with JC/JC2 series 5 
OP-100302 Contact-type sensing head Needle-shaped Compatible with JC/JC2 series 6 
OP-1004 Contact-type sensing head Bias type Compatible with JC/JC2 series 7 
OP-100501 Install the bracket General-purpose Compatible with JC Series/JC2-H12 8 
OP-100502 Install the bracket General-purpose Compatible with JC2-32/JC2-H50 9 
OP-1006 Install the bracket Side-mount type Compatible with JC/JC2 series -
Controller Installation method DIN rail mounting Model JC-K10M JC-K10S Power supply voltage 12~24V Power supply wattage Normal mode ≤1200mW Energy-saving mode ≤840mW Display method Indicator light displays Yellow The measured value shows OLED screen AD value display range 0~65535 Display accuracy 0.1 μm Sampling rate 3000 times per second Main functions Five detection modes, variable response time, clock mode, power-saving mode, brightness adjustment, wire-core alarm, wire-core value display, display filtering, temperature alarm, channel function (4-channel library), calibration function, and calculation function. Input mode External timing input Internal timing input HIGH, GO, LOW Output NPN collector open-collector, maximum 100 mA (NPN: 24V). Residual voltage: 1V or less. N.O./N.C. can be switched between each other. Response time 1 ms, 5 ms, 10 ms, 100 ms, 1000 ms Environmental resistance Ambient temperature 0°C to +55°C Relative humidity 35%~85% (no condensation) Vibration resistance 10–55 Hz, double amplitude: 1.5 mm, 2 hours each in the X, Y, and Z directions Materials Main chassis: ABS + PC, key surface: ABS + PC, front panel: PC, cable: PVC Weight (including 2-meter power cord) Approximately 135g Communication method 485 communication Baud rate 115200 Sensor head Model JC-P5 JC-P10 Calibration range 5mm 10mm Repeatability 2 μm (ambient temperature 23℃) 2 μm (ambient temperature 23℃) Measure force During downward installation: 1.0 N
When mounted on the side: 0.9N
During installation impact: 0.8N
During downward installation: 1.0 N
When mounted on the side: 0.9N
During installation impact: 0.8N
Environmental resistance Ambient temperature 0°C to +55°C Relative humidity 35%~85% Enclosure rating IP65 Materials Housing: Type 430 stainless steel; Indicator light: Polyaryl compound; Dust cover: NBR; Contact points: Type 304 stainless steel + tungsten steel; Cable: PUR Weight (including 2-meter power cord) Approximately 50g Approximately 63g -
Model: JC-K10
Model: JC-P5
Model: JC-P10
Keywords:
Sensor
Measurement sensor
Measuring instrument
Visual system
Communication
Recommended Products
If you have any questions or would like to learn more details, please contact us!
Address: No. 36, Moganshan Road, Beilun District, Ningbo City, Zhejiang Province
Phone:+86-574-82822433 / (400)8679286
Fax:+86-574-88137049
Email:office@ejanpos.com