Product Introduction
Category:
High-precision measuring instrument
• High precision, repeatability of 0.15 μm
• High-precision scanning, up to 16,000 scans per second
• Long service life
- Product Details
- Specification Parameters
- External dimensions
-
I. Detection Principle
The green LED light is projected onto the target as a single, parallel beam. The edges between bright and dark areas on the CCD are detected, thereby obtaining measurement values such as outer diameter and spacing.
II. Suitable for Harsh Environments
The measuring head complies with the IP67 standard and can reliably prevent water or dust from entering.
3. Standard air purging component
It can prevent contamination on the front surface of the sensor’s sensing head.
Application scenarios 
Outer diameter measurement Measure the outer diameter and eccentricity of the roller. Measure the spacing between IC leads. 
Check the tilt of the platform before the furnace hopper. Measure the outer diameter of the optical fiber. Measure the outer diameter of the capacitor. 
Check the height of the spring Measure the outer diameter of the ampoule. Leadframe Edge Control 
Film Winding Control Slot for wafer inspection Detecting the tilt of bottle caps 
Outer Diameter Measurement of High-Speed Wire Rods Check the depth of the machined groove. Outer diameter measurement of the shaft -
Sensor head Model JG-L2030 Measure distance 0.3 mm to 30 mm Minimum detectable object 0.3mm Transmitter/Receiver Distance 160 ± 40 mm Repeatability ±0.15 µm Measurement accuracy ±2 µm* Sampling period 16,000 times per second Light source Green LED Monitoring function None Environmental adaptability Operating ambient temperature 0 to +50℃ Ambient humidity of use 20–85% RH (no frost) Ambient Illuminance Incandescent lamps and fluorescent lamps: 3000 lux or less Anti-vibration 10–55 Hz, 1.5 mm amplitude, 2 hours in each of the X, Y, and Z directions Shock-resistant 15G/6 ms Enclosure protection rating IP67 Material Aluminum alloy * Move within the measurement area of 6 mm x 20 mm in outer diameter mode. The error when measuring with a circular tube of Φ10 mm.
Controller Model JG-LK100 Camera & Light Source Number of camera interfaces 2 dedicated interfaces IO Enter the number of points 6 inputs Input function AC optocoupler isolated input, NPN/PNP compatible, effective input voltage: 5–30V Output number of points 12 output Output function Solid-state relay with isolated output, NPN/PNP compatible; maximum output: 30V, 500mA. Communication RS485 √ GIGE 1 Power supply Voltage 24VDC ±10% Current 5A Display interface HDMI √ VGA √ Power button √ Environmental resistance Operating temperature 0~50℃ Relative humidity 35~85% RH (no condensation) ESD Immunity GB T 17799.2-2003 EFT Immunity GB T 17799.2-2003 Anti-vibration 10–55 Hz, 1.5 mm双向 amplitude, 2 hours each in the X, Y, and Z directions Materials Housing Aluminum alloy External dimensions 193.5 mm × 112 mm × 184.7 mm Weight 2.40kg Installation method Horizontal placement, bottom mounting, back mounting -
Model: JG-L2030
Controller Model: JG-LK100
Keywords:
Sensor
Measurement sensor
Measuring instrument
Visual system
Communication
Recommended Products
If you have any questions or would like to learn more details, please contact us!
Address: No. 36, Moganshan Road, Beilun District, Ningbo City, Zhejiang Province
Phone:+86-574-82822433 / (400)8679286
Fax:+86-574-88137049
Email:office@ejanpos.com