Product Introduction
Category:
Laser displacement sensor
• Suitable for a variety of materials
• Triangle Detection Method
• High-precision measurement
- Product Details
- Specification Parameters
- External dimensions
-
1. It can measure objects made of various materials.
Measurements are performed on diffuse, transparent, and translucent objects.
II. Detection Principle
The measurement principle of the JG-D series is to use triangulation to detect the position of CMOS reflected light. By measuring this change, the position of the target object can be determined.
III. High-Precision Measurement
The JG-D series is designed to precisely focus on and detect reflections from the object under test, even for small, precision products. It enables highly accurate measurements, even when the object is moving, rotating, or vibrating at high speeds.
Application scenarios 
Measure PCB deformation Workpiece Flatness Inspection Measure the vibration of the pressure-driven actuator. 
Adjust the camber/caster angles Measure the deflection of the rotating disk. Highly controlled welding process 
Measure film thickness Adjust the HDD arm assembly. Double-layer steel plate feeding detection -
Sensor head Model JG-D1052 Installation mode Diffuse reflection Reference distance 50mm Measurement range *1 ±10 mm Light source Types Red semiconductor laser Wavelength 655nm Laser Classification GB7247.1 Category 2 FDA (CDRH) 21 CFR Part 1040.10 Class II Output 0.95mW Spot diameter (at reference distance) Φ50μm Linear * 2 ±0.02% F.S. (F.S. = 20 mm) Repeatability *3 0.025 μm Sampling frequency 2.55/5/10/20/50/100/200/500/1000 μs Temperature characteristics ±0.01% F.S./℃ (F.S. = 20 mm) Environmental resistance Enclosure protection class IP67 Ambient lighting Incandescent or fluorescent lamps: Up to 10,000 lux Ambient temperature 0 to +50℃ Environmental humidity 35% to 85% RH (no condensation) Vibration-resistant 10 to 55 Hz, 1.5 mm double amplitude, 2 hours each in the X, Y, and Z directions Material Aluminum die Weight Approximately 260g *1: Measurement range when the sampling period is 20 μs or longer.
*2: This value refers to the measurement result obtained under normal measurement mode for a standard target object (applicable only to the white diffuse reflectance artifact or artifacts with metallic specular surfaces used in JG-D1052).
*3: This value refers to the measurement obtained at a reference distance where the averaging value is set to 16,384, for the target object (applicable only to the white diffuse reflector workpiece used with the JG-D1052 or workpieces with metallic specular surfaces). The values in parentheses represent typical measurements obtained when the averaging value is set to 65,536 and the sampling period is 200 μs.
Controller Model JG-DK100 Interface Display panel connector Network port 2 network ports DIO Spring-type KF connector Power input 24V/2A Overall power consumption Maximum power consumption: 24W Indicator light PWR, RUN, CAM, OK, NG Data interface USB 3.0 × 2, 1000M network port × 1, HDMI interface × 1, 3-pin power connector × 1 I/O port 4 optocoupler-triggered inputs, 8 optocoupler-triggered outputs, supports 1 RS232 port Controller dimensions 107mm × 81.65mm × 56mm Main material Aluminum alloy Weight <750g Operating temperature 0~50℃ Operating humidity 20–80% RH (no condensation) Storage temperature -20~60℃ Storage humidity 20–95% RH (no condensation) -
Model: JG-D1052
Model: JG-DK100
Keywords:
Sensor
Measurement sensor
Measuring instrument
Visual system
Communication
Recommended Products
If you have any questions or would like to learn more details, please contact us!
Address: No. 36, Moganshan Road, Beilun District, Ningbo City, Zhejiang Province
Phone:+86-574-82822433 / (400)8679286
Fax:+86-574-88137049
Email:office@ejanpos.com